TYKS-1064-F11-F53 Fiber Laser Projection Lens
Model：TYKS-1064-F11-F53
Overview
TYKS-1064-F11-F53 fiber laser projection lens: adjustable focal length 11~53mm, max image diameter ≥100mm, 1:1 magnification, spot 2~9cm adjustable, mates with 12kW multimode fiber lasers (QBH, 600μm round / 400×400μm square core, NA 0.15) for large-beam laser projection, VR/AR and homogenized illumination.Description
Overview
TYKS-1064-F11-F53 fiber laser projection lens is a high-performance optical projection device using fiber laser as light source, offering high brightness, high contrast and high color saturation. With adjustable focal length 11~53mm, max image diameter ≥100mm, 1:1 magnification and adjustable spot 2~9cm, it mates with 12kW multimode fiber lasers (QBH interface, 600μm round or 400×400μm square core, NA 0.15) for laser projection, VR and AR applications.
Features
- Large beam projection: max image diameter ≥100mm; spot 2~9cm adjustable
- Adjustable focal length: 11~53mm
- High image quality: high resolution, low distortion, 1:1 magnification
- Homogenized flat-top beam matching laser output profile
- Compatible with 12kW multimode fiber lasers; QBH interface
- Applications: laser projection, VR, AR
Applications
- High-power fiber laser projection
- VR / AR displays
- Large-area homogenized illumination and imaging
【Contact】
17317958112
Specifications
| Model | TYKS-1064-F11-F53 |
| Light Source | Fiber laser |
| Wavelength Range | 900~1100nm |
| Focal Length Range | 11mm~53mm (adjustable) |
| Max Image Diameter | ≥100mm |
| Optical Magnification | 1:1 |
| Working Distance | 2m from output (up to 3m) |
| Spot Size | Adjustable, 2cm~9cm |
| Back Working Distance | 2.5m |
| Compatible Laser | 12kW multimode fiber laser (600μm round or 400×400μm square core) |
| Laser Requirements | Divergence <300mrad (99% power); NA 0.15; homogenized flat-top |
| Output Interface | QBH |
Technical Data
TYKS-1064-F11-F53 光纤激光投影镜头 性能参数
| 项目 | 参数 |
|---|---|
| 产品名称 | 光纤激光投影镜头 |
| 产品型号 | TYKS-1064-F11-F53 |
| 光源类型 | 光纤激光 |
| 波长范围 | 900~1100nm |
| 焦距调节范围 | 11~53mm（可调） |
| 最大成像直径 | ≥100mm |
| 光学倍率 | 1:1 |
| 成像距离 | 距系统出光口 2m（可放宽至 3m） |
| 靶面光斑形态 | 与激光器输出光斑一致（匀化平顶光） |
| 光斑尺寸 | 可调，调节范围不小于 2cm~9cm |
| 系统后工作距 | 2.5m |
| 适配激光器 | 12kW 多模光纤激光器 |
| 输出纤芯 | 600μm 圆形（或 400×400μm 方形） |
| 输出发散角 | <300mrad（99% 功率占比） |
| 物方空间 NA | 0.15 |
| 输出接口 | QBH |
光斑调节对照表
| 聚焦光斑直径 | 20mm | 30mm | 50mm | 80mm | 90mm |
|---|---|---|---|---|---|
| 旋筒 1 | 10.6 | 9.1 | 7.3 | 5.5 | 2.2 |
| 旋筒 2 | 0 | 1.6 | 4.6 | 4.3 | 5.5 |
| 旋筒 3 | 6.8 | 7 | 7 | 1.5 | 0.8 |
（旋转调节筒刻度，从上到下聚焦光斑直径分别为 20/30/50/80/90mm，系统后工作距 2.5m）
镜头光路设计（光线追迹仿真：不同焦距状态下的光斑聚焦形态）