Pulse laser power detector
Overview
SLT (Germany) Series CP pulse laser power detectors with ceramic absorbing layer and high sensitivity: high damage threshold, short time constant, relatively high sensitivity and high aperture, for pulse lasers with high power density (Excimer, CO2-TEA, Nd-YAG). Models CP 25 and CP 25 S; CP 25 S compact design for service.Description
【Overview】
Series CP pulse laser power detectors, manufactured by SLT Sensor- und Lasertechnik GmbH (Germany), with ceramic absorbing layer and high sensitivity. High damage threshold, short time constant, relatively high sensitivity and high aperture serve a wide range of applications.
【Key Features】
(1) Ceramic absorbing layer, high damage threshold;
(2) Time constant <2s, fast response;
(3) Relatively high sensitivity (approx. 100 mV/W);
(4) CP 25 max average power 25W (30W for 2min);
(5) CP 25 S compact design for service applications;
(6) E-Connector with EEPROM.
【Typical Applications】
Power measurement of pulse lasers with high power density: Excimer, CO2-TEA, Nd:YAG.
Specifications
| Model | CP 25; CP 25 S |
| Active diameter | 25mm |
| Sensitivity | approx. 100 mV/W |
| Time constant | <2s |
| Max. average power | 25W (30W for 2min) / 8W (10W for 2min) |
| Detection threshold | 1mW |
| Max. power density | 40 W/cm² |
| Connector | E-Connector with EEPROM |
| Dimensions | 100×100×46mm / Ø90×28mm |
Technical Data
Thermopile 系列规格表（BB/LP/HP/CP）
吸收层特性与尺寸图
数据来源：SLT Sensor- und Lasertechnik GmbH（Made in Germany）