Synchronous trigger pulse signal generator
Overview
Main applications: 1. Used for synchronous control between Q-switched and other pulse lasers; 2. In the ultrafast amplifier, the synchronization between the oscillator, the amplifier pump source and the pucker box in the amplifier can be controlled; 3. Trigger the laser pulse by external frequency division; 4. Delay the laser pulse signal to trigger other instruments and equipment.Description
1. Overview
同步触发脉冲信号发生器 provided by Sunpump, designed for 激光器同步触发 applications. Customization is available upon request.
3. Typical Applications
激光器同步触发; 泵浦-探测实验; 高速成像; 多通道时序控制.
Specifications
| Minimum resolution | 0.25ns |
Technical Data
Main features:
1. Four / nine TTL signal output channels: the frequency of each channel is adjustable from 1Hz to 1MHz respectively (during internal trigger);
2. Frequency division function in case of external trigger;
3. The duty cycle of the output signal of each channel is adjustable;
4. The signal delay of each channel is adjustable from 0ns to 1ms (the minimum resolution is 0.25ns);
5. The output signal of each channel can be output in reverse phase, or only output high level or low level.6. 6.Synchronization function: automatically synchronize the output pulse signal with the input RF signal (the time jitter is less than 50ps).
7.The RF can be counted accurately in the range of 1 MHz to 7 bits; TTL signals can also be counted at 1Hz to 1MHz.
8. Portable design.